YG100 Surface Mounter

• High-speed mounting capacity handling 24,000CPH(0.15sec/CHIP Equivalent : optimum condition)
• +/-50μm(CHIP), +/-30μm(QFP) mounting absolute accuracy in full time operation
• Handles a wide range of components from 0402 chips to 45mm components and with long connectors
• Capable of handling 15mm height components
• Applicable to longer length PCB(up to L510mm)

Model YG100RA(FNC type) / YG100RB(SF type)(Model : KHW-000)

• Applicable PCB L510xW440mm to L50xW50mm(Note 1)(Note 2)
• Through-put (Optimum) 24,000CPH(0.15sec/CHIP Equivalent)
• Mounting accuracy (Yamaha's standard components) Absolute accuracy (μ+3σ):+/-0.05mm /CHIP, +/-0.05mm /QFP Repeatability(3σ):+/-0.03mm /CHIP, +/-0.03mm /QFP
• Applicable components 0402(Metric base) to □45mm components, SOP/SOJ, QFP,connector, PLCC, CSP/BGA, Long connector (Note 3)(Note 4)(Note 5)
• Height of components which can be mounted : 15mm or less(Note 6)
• Number of component types 96types(Max,8mm tape reel conversion)(Note 1)
• Power supply 3-Phase AC 200/208/220/240/380/400/416V +/-10% 50/60Hz
• Air supply source 0.55MPa or more, in clean, dry states
• External dimension (Note 7) L1,650xW1,562(End of cover)xH1,470mm(cover top)L1,650xW1,615(End of guide for feeder carriage)xH1,470mm(cover top)
• Weight Approx. 1,630kg(Main unit only)

(Note 1)It is varied by the combination layout together with sATS / wATS / dYTF etc.
(Note 2)For information on "Longer length PCB spec." and "2 stages push-up spec.", please consult us separately.
(Note 3)In case of the □31 type multi-camera, the applicable long connectors range is W31×L100mm or less.
(Note 4)In case of the □45 type multi-camera, the applicable long connectors range is W45×L100mm or less.
(Note 5)When handling long connectors and large sized components, about the eccentric offset values and the rotation angle, please consult us separately.
(Note 6)4mm or less height of upper face of PCB before transport is required for YG100RA.
(Note 7)This dimension does not include the projection.